Making wood arrows
Forum rules
This area strictly for arrows. Building, flight or broadhead flight.
This area strictly for arrows. Building, flight or broadhead flight.
-
- Site Admin
- Posts: 12787
- Joined: Tue Aug 26, 2014 8:19 pm
Re: Making wood arrows
OK, then. That's settled.
For the record I've tried shooting some grossly mis-matched arrow/bow combos...like this one:
The bow: Pearson Super-Jet, 35# @ 26, not cut for shelf at all:
[/url]
The arrows: Easton XX75 2216's made for a 60-70# compound bow:
Distance: 20 yards
These arrows should not even fly straight, let alone hit the target anywhere near each other.
For the record I've tried shooting some grossly mis-matched arrow/bow combos...like this one:
The bow: Pearson Super-Jet, 35# @ 26, not cut for shelf at all:
[/url]
The arrows: Easton XX75 2216's made for a 60-70# compound bow:
Distance: 20 yards
These arrows should not even fly straight, let alone hit the target anywhere near each other.
Aim small, miss small!
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Making wood arrows
Lol! I'd like to see a slow motion video from behind, of them suckers coming out of that bow!
The element of surprise can never be replaced by persistence.
-
- Posts: 251
- Joined: Fri Sep 08, 2017 10:41 am
Re: Making wood arrows
Yup. That's been my experience too.Captainkirk wrote:OK, then. That's settled.
For the record I've tried shooting some grossly mis-matched arrow/bow combos...like this one:
The bow: Pearson Super-Jet, 35# @ 26, not cut for shelf at all:
[/url]
The arrows: Easton XX75 2216's made for a 60-70# compound bow:
Distance: 20 yards
These arrows should not even fly straight, let alone hit the target anywhere near each other.
-
- Posts: 251
- Joined: Fri Sep 08, 2017 10:41 am
Re: Making wood arrows
I will say that I wasn't sure there was anything to argue about. I thought we were in agreement all along.
-
- Site Admin
- Posts: 12787
- Joined: Tue Aug 26, 2014 8:19 pm
Re: Making wood arrows
We were, yes...Longbowfanatic wrote:I will say that I wasn't sure there was anything to argue about. I thought we were in agreement all along.
Some folks on other forums will dissect an arrow like it was a murder victim, fussing and fiddling down to the last grain of weight, perfectly matched spine and straightness...
Again, there is nothing wrong with this approach. There IS something wrong with trying to terrify newbies into hysterics by telling them they totally messed up by buying 500 spine instead of 400 spine and they should toss them in the garbage...fairly prevalent on some of the target sites. You learn as you go, so I've found...but heck, you could probably shoot a rake handle with a slot cut in it and do OK.
Helping folks attain the best arrow flight and performance is one thing. Upbraiding them for their choice is another altogether. That has nothing to do with this forum though.
Aim small, miss small!
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Making wood arrows
Affirmative. If any person....esp a newbie...is seeing their arrow as one of good flight and hitting their mark...what else could be wanted? I'm certain a newb isn't going to have as keen of an eye or sensory about the arrows tune and flight, as someone who has tuned a thousand arrows and perfected the release....but c'mon, it ain't gonna be THAT bad. If there is room for improvement, let em be and let time take it's course. They'll get better if need be in due time. It's like anything else, the more you do it the better you get at it. But that hardly means the beginning arrows were unacceptable...it simply means over time they may or may not make improvements in their tuning approach.
The element of surprise can never be replaced by persistence.
-
- Posts: 251
- Joined: Fri Sep 08, 2017 10:41 am
Re: Making wood arrows
Yup. Good points. Thanks. I used to buy .001-.003 straightness carbon arrows until I shot with a national champion archer. He told me that in a shooting machine .006 straightness arrows will impact about an inch from .001 straightness arrows at 50 yards, and that the difference between .001 and .006 straightness arrows is about three to four human hairs. Unbelievable!Captainkirk wrote:We were, yes...Longbowfanatic wrote:I will say that I wasn't sure there was anything to argue about. I thought we were in agreement all along.
Some folks on other forums will dissect an arrow like it was a murder victim, fussing and fiddling down to the last grain of weight, perfectly matched spine and straightness...
Again, there is nothing wrong with this approach. There IS something wrong with trying to terrify newbies into hysterics by telling them they totally messed up by buying 500 spine instead of 400 spine and they should toss them in the garbage...fairly prevalent on some of the target sites. You learn as you go, so I've found...but heck, you could probably shoot a rake handle with a slot cut in it and do OK.
Helping folks attain the best arrow flight and performance is one thing. Upbraiding them for their choice is another altogether. That has nothing to do with this forum though.
-
- Posts: 251
- Joined: Fri Sep 08, 2017 10:41 am
Re: Making wood arrows
Kinda puts things in perspective.
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Making wood arrows
....so to take that further... 25 yards there would only be 1/2" difference between the two. And so for the hunter in us, at 12.5 yards there would only be 1/4" difference between the two. Not really to hard to see why I'm buying the cheaper .006 every time!
It's actually only a human hair or 2 difference, as the average human hair is around .003".
It's actually only a human hair or 2 difference, as the average human hair is around .003".
The element of surprise can never be replaced by persistence.
-
- Posts: 251
- Joined: Fri Sep 08, 2017 10:41 am
Re: Making wood arrows
Shadowhntr wrote:....so to take that further... 25 yards there would only be 1/2" difference between the two. And so for the hunter in us, at 12.5 yards there would only be 1/4" difference between the two. Not really to hard to see why I'm buying the cheaper .006 every time!
It's actually only a human hair or 2 difference, as the average human hair is around .003".
Good point. If one human hair is .003 that makes my point even more. If three or four hairs difference are truly only two, that’s even more significant. And that accuracy seen is assuming a perfect release each time!