That was one of the reasons I was told to mount 'em flat. Another was that a larger BH can interfere with your line of sight(???) if mounted vertically. Not sure I understand that one.Shadowhntr wrote:I used to mount mine vertically all the time. However a few years ago I was using wood arrows, and I didn't get em to tune out quite long enough, so when I'd draw, the back of the bottom blade would come up against my hand. So I turned them horizontally and have been doing so every since. I can't tell a bit of difference in flight, accuracy, or feel myself.
Test driving broadheads
-
- Site Admin
- Posts: 12788
- Joined: Tue Aug 26, 2014 8:19 pm
Re: Test driving broadheads
Aim small, miss small!
Re: Test driving broadheads
It's early in my testing process, I got a feeling I may change them back before season, not sure yet. Mighty close to my hand! When I first start shooting them I can't keep from noticing them as I draw/anchor, it hinders my concentration on the spot, but soon I see them no more!
-
- Site Admin
- Posts: 12788
- Joined: Tue Aug 26, 2014 8:19 pm
Re: Test driving broadheads
That's one of the reasons I try to leave my shafts as close to full length as possible!
Aim small, miss small!
Re: Test driving broadheads
And I like mine short as possible to handle additional weight up front. Guess there is no wrong way, just different ways.
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Test driving broadheads
I prefer mine short as possible...but with tuning on the front of my agenda, unfortunately most arrows I want to use in my poundage and head weight ends up longer then I like....im pretty much used to it now though.
The element of surprise can never be replaced by persistence.
-
- Site Admin
- Posts: 12788
- Joined: Tue Aug 26, 2014 8:19 pm
Re: Test driving broadheads
Ahh, but recall if you will...the heaviest BH I've used so far has been 125gr.
Aim small, miss small!
Re: Test driving broadheads
I'm in the short arrow camp too! More FoC, less arrow for wind to catch, handier in the back/bow quiver, and less weight spent on the shaft means I can spend more on the arrowhead.
I did a little trading and now have a few more BHs to add to my collection and test out, got some big old magnus 1, a simmons tigershark, and some 190gn vpa 3 blades.
I am kinda digging the mean looks of the simmons, sharpens up nice on the accusharp too, I was a little worried as I have seen many threads about how hard they are to sharpen.
I did a little trading and now have a few more BHs to add to my collection and test out, got some big old magnus 1, a simmons tigershark, and some 190gn vpa 3 blades.
I am kinda digging the mean looks of the simmons, sharpens up nice on the accusharp too, I was a little worried as I have seen many threads about how hard they are to sharpen.