Stay Sharp broadhead sharpener
Forum rules
Be fair.
Be fair.
-
- Site Admin
- Posts: 12824
- Joined: Tue Aug 26, 2014 8:19 pm
Stay Sharp broadhead sharpener
This little gizmo is made and marketed by our own Stay Sharp (Ron). It's inexpensive, simple to use, and just plain WORKS. It can be used with sharpening stones or simple sandpaper on a flat surface and is more or less idiot proof. If sharpening those dull-from-the-factory Zwickeys or similar broadheads just ain't your thing, give this a try. You just might be surprised.
Stay Sharp with a Zwickey installed
A link to Ron's website:
http://staysharpguide.com/
Highly recommended!
Stay Sharp with a Zwickey installed
A link to Ron's website:
http://staysharpguide.com/
Highly recommended!
Aim small, miss small!
Re: Stay Sharp broadhead sharpener
I make two versions. One for replaceable blade broadheads and a version for fixed blade heads. Here is a video of how to use the guide.
https://www.youtube.com/watch?v=b0Cs1GckwJA
This enterprise really took off and is selling far better than I expected and its keeping me quite busy.
https://www.youtube.com/watch?v=b0Cs1GckwJA
This enterprise really took off and is selling far better than I expected and its keeping me quite busy.
The Joy is in the doing.
Re: Stay Sharp broadhead sharpener
Going to town today to get my money order. If it wasn't for gun season I'd have to wait till Feb. I think.
"Nothing wrong with the quiet."
Re: Stay Sharp broadhead sharpener
The Joy is in the doing.
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Stay Sharp broadhead sharpener
Will these do the 25° bevel of single bevel broadheads?
The element of surprise can never be replaced by persistence.
Re: Stay Sharp broadhead sharpener
Our guide sharpens heads at 22 degrees. Its ok to have a different bevel angle than factory. All that matters is that you raise a burr and they are sharp.
The Joy is in the doing.
-
- Posts: 413
- Joined: Sun Oct 04, 2015 7:03 am
Re: Stay Sharp broadhead sharpener
The edge of an original Bear broadhead is not straight. it has a little bit of a curve to it. This sharpener won't work on them, will it?
Re: Stay Sharp broadhead sharpener
Sure it will. I have sharpened many Bear heads with our sharpener. It takes a little technique. You rock the edge and you roll forward. Our guide holds the angle but you apply a little pressure on the bevel at the heels while rolling forwards and rocking towards the tip.
The Joy is in the doing.
- Shadowhntr
- Posts: 4614
- Joined: Wed Feb 10, 2016 4:47 pm
Re: Stay Sharp broadhead sharpener
Im sure it will sharpen just about any 2 blade you throw at it.
The element of surprise can never be replaced by persistence.
Re: Stay Sharp broadhead sharpener
Except concave heads like Simmons sharks.
The Joy is in the doing.